Function and characteristics
The XJL-600A drop hammer impact tester is suitable for impact test of steering rod products in the automotive industry. It is a test instrument for evaluating the impact resistance of product components. At the same time, it is also possible to carry out impact comparison tests on samples of the same material and the same specification to identify the quality of the materials. Both the pass method and the gradient method are applicable.
The test machine adopts program control technology, which can preset the impact height, automatically prevent secondary impact, automatically lift the hammer to a predetermined height, and display the height at any time. The number of impacts can be set to achieve continuous impact. The machine has good reliability and high precision, and meets the requirements of the professional standard ZBN72026-90 drop hammer impact tester technical conditions.
1,The machine has been improved on the original basis. The original two guide columns (that is, support and can be guided) are changed to two guide columns, and four columns are supported. The whole machine is safer and more reliable. The operation is more convenient!
2, According to the sample size, by controlling the rotation of the motor reducer to drive the screw to rotate the table (this function is optional).
3, the protective cover greatly enhances the safety of the operator using the instrument.
4, The number of impacts is stored for a long time.
5, the lifting height of the hammer head is adjustable.
Main technical parameters
1, Maximum impact energy: 600J
2, The use temperature: 10-35 °C
3, There is no large vibration source nearby, and there is no strong electromagnetic field.
4, There is no corrosive medium in the environment, and pay attention to the ventilation of the electric control box.
5, Power: AC 220V ± 10% 2A
6, The total mass of the hammer: 30Kg
7, Weights: 5Kg 4pcs
8, The basic hammer weight: 10Kg
9, Hammer mass accuracy: 0.5%
10, Workbench: 600* 600mm (can be customized according to user requirements)
11, Workbench installation form: trapezoidal slot M20
12, Hammer form: cylindrical head is flat, Φ50mm
13, The maximum impact height range: 2000mm
14, Height positioning error: less than ± 2mm
15, Dimensions: 1000 * 1000 * 2600mm (L*W*H)
16, The whole machine weight: about 720kg
17, The deviation between the impact center and the fixture center is not more than 2mm.
18, Electric hammer lifting mechanism: maximum lifting force 45kgf
19, The maximum suction force of the traction electromagnet is not less than 45kgf