ABOUT
ABOUT LIANGONG>
LIANGONG CULTURE>
HONORS>
CORPORATE STYLE>
PRODUCT
Electronic Universal Testing Machine Series>
Electro-Hydraulic Servo Universal Testing Machine Series>
Impact Testing Machine Series>
Impact Testing Low Temperature Chamber Series>
Torsion Testing Machine Series>
Compression Testing Machine Series>
Deep Drawing Cups Testing Machine Series>
Bending Testing Machine Series>
Specialized Testing Machine Series>
Metallographic Series>
Hardness Tester Series>
Attachment>
SOLUTION
NEWS
Corporate News>
Industry Information>
SERVICE
CONTACT
GFW-90 Cable repeated bending test machine
  • GFW-90 Cable repeated bending test machine

GFW-90 Cable repeated bending test machine

GFW-90 Cable repeated bending test machine is mainly used for cable pipe bending performance test, including type test and factory test to determine the ability of the cable to withstand bending
  • 规格型号:GFW-90
Structure and characteristics
 The test machine is mainly used for cable pipe bending performance test, including type test and factory test to determine the ability of the cable to withstand bending. The pipe bending and bending test machine is mainly composed of a frame, a crank connecting rod device, a weight hanger, a guard rail, a weight and a bending mandrel, and an electric control box.
 
The driving principle of the test machine repeatedly bending adopts a crank connecting rod structure. The motor is connected to the reducer, and the reducer drives the crank-link mechanism to swing and complete the experiment.
 
The bending speed of repeated bending is realized by the inverter controlling the rotation speed of the three-phase asynchronous motor.
 
Main technical parameters
1.Bending angle: ±90°;
2.Bending mandrel radius: R25, R50, R75, R100, R127, R150, R190mm, replace it according to the requirements of the cable test;
3.Weight of the hammer: 200kg of pre-tension weight, including weight bracket (20kg), 6pcs 25kg weights and 2pcs 15kg weights. Add adjustments according to the requirements of the cable test;
4.Repeated bending arm length ≥1000mm, distance between the hammer and bending mandrel>500mm, set three pipe fastening positions from bending arm to rotating shaft 250mm, 500mm, 1000mm, according to the cable test requirements, you can change the adjustment position.
5.Bending speed: 10 to 30 times / min (speed adjustable);
6.Repeated bending times: 1 to 9999 times, can be set arbitrarily;
7.Automatically record the number of repeated bending times, and run to the set number of times to automatically terminate the test.

Related Products