ABOUT
ABOUT LIANGONG>
LIANGONG CULTURE>
HONORS>
CORPORATE STYLE>
PRODUCT
Electronic Universal Testing Machine Series>
Electro-Hydraulic Servo Universal Testing Machine Series>
Impact Testing Machine Series>
Impact Testing Low Temperature Chamber Series>
Torsion Testing Machine Series>
Compression Testing Machine Series>
Deep Drawing Cups Testing Machine Series>
Bending Testing Machine Series>
Specialized Testing Machine Series>
Metallographic Series>
Hardness Tester Series>
Attachment>
SOLUTION
NEWS
Corporate News>
Industry Information>
SERVICE
CONTACT
GSPL-100 Steel Wire Rope Bending Fatigue Testing Machine
  • GSPL-100 Steel Wire Rope Bending Fatigue Testing Machine

GSPL-100 Steel Wire Rope Bending Fatigue Testing Machine

GSPL-100 Steel Wire Rope Bending Fatigue Testing Machine is used to test the elevator in the test range of the wire rope and the rope for the aircraft control in the range of 12 7-15 88 (1 6mm-9 5mm)
Machine application 
The simulated steel wire rope is installed in the actual working condition of the elevator. It is used to test the elevator in the test range of the wire rope and the rope for the aircraft control in the range of 12.7-15.88 (1.6mm-9.5mm). The wire rope bending fatigue test, before the test, the actual diameter of the wire rope sample is measured under the condition of no stretching, and then the actual working condition of the elevator is simulated to bypass the test wheel (traction wheel) at a certain wrap angle. And the tension is applied, and the bending is repeated at a certain frequency to evaluate the performance of the wire rope subjected to bending fatigue.
 
Main technical specifications
Loading range: 100-1000lb (including the total weight of sheave, counterweight, etc.)
Test frequency range: 40 to 60HZ (can be adjusted freely within the range of 40 to 60)
Test section length: 50-500mm;
Test wheel wrap angle adjustable range: 150°-180°
Test machine weight: 2500kg
Motor power: 4.0KW
Power: 380V 50Hz

Related Products