JWJ series repeated bending test machine is mainly used for repeated bending test of metal plates, wires, strips and other materials to check the performance of plastic deformation and the defects displayed in the repeated bending. As a testing machine, it should regularly maintained during long-term use to ensure the durability and accuracy of the equipment.
Maintenance methods:
1,All parts of the testing machine should be cleaned frequently, and the unpainted surface should be oiled to prevent rust. After the accessories are used, they should also be oiled to prevent rust and be stored properly. During the rainy season, pay more attention to rust prevention. If the jaw is used for a long time and the surface has abrasion marks, the position of the jaw can be changed and continued to be used.
1,All parts of the testing machine should be cleaned frequently, and the unpainted surface should be oiled to prevent rust. After the accessories are used, they should also be oiled to prevent rust and be stored properly. During the rainy season, pay more attention to rust prevention. If the jaw is used for a long time and the surface has abrasion marks, the position of the jaw can be changed and continued to be used.
2,The host's worm pair, gear and other transmission mechanisms should be added with molybdenum disulfide grease every six months.
3,You can remove the six screws of the upper cover, open the upper cover, and apply it on various parts to facilitate lubrication.
4,When the repeated bending testing machine is not in use, cover it with a cloth to prevent dust from invading and affecting the normal use of the testing machine; if it is not used for a long time, please apply antirust oil.
5,Maintenance of this repeated bending test machine should be performed by professionals. If you have any questions during use, please feel free to contact us for consultation and get help.