Usage:
The CMT series of microcomputer control electronic universal testing machine is mainly used for tensile, compression, bending and shearing,peeling and tearing of metal wire, adhesive, rubber, fastener, wood, adhesive, composite material, wire and cable industry,etc
Main Characteristics:
DSC-10 all-digital closed-loop control and measurement system, to achieve a dedicated displacement, deformation, speed closed-loop control;
Software and hardware two levels of protection, to achieve the test machine overload, overcurrent, overvoltage, undervoltage, speed, limit and other security protection;
3 high-speed 24-bit A / D conversion channel, to achieve no step both inside and outside and the whole resolution unchanged;
USB or serial communication, data transmission is stable and reliable, anti-interference ability, the computer does not need to add hardware, easier to use the computer online operation;
Main Technical Parameter
Max. Test Force(kN) |
10,20,30,50 |
Accuracy Grade |
0.5 Grade |
Test Force Measurement Range |
0.2%~100%FS(Full Scale) |
Test force and relative error value |
Better ±0.5% than indicating value |
Effective Tensile Space
(Customizable)
|
700mm(Customizable) |
Effective Compression Space
(Customizable)
|
700mm(Customizable) |
Effective Width Space
(Customizable)
|
400mm(Customizable) |
Power Supply |
220V,50Hz,0.75~1kW |
Working Environment |
Room Temperature~35℃,relative humidity not more than 80% |
Remarks |
1. Equipped Fixture can be based on user’s needs or customer made
2. Alternative transducer is available to extend the measuring range
3. The tensile space can be heighten on user’s requirements |